{"id":4335,"date":"2014-02-05T14:17:57","date_gmt":"2014-02-05T06:17:57","guid":{"rendered":"http:\/\/www.yuleshow.com\/?p=4335"},"modified":"2014-02-05T14:17:57","modified_gmt":"2014-02-05T06:17:57","slug":"777-checklist","status":"publish","type":"post","link":"https:\/\/www.yuleshow.com\/?p=4335","title":{"rendered":"777 checklist"},"content":{"rendered":"

Checklist B777<\/u><\/strong> <\/p>\n

          uncheck Custom Failures, Real Limits, Hide Yokes, Real Time <\/p>\n

          check Chocks, Doors MAN, Stairs <\/p>\n

          open doors (Shift + F1\/F2) <\/p>\n

          Battery: ON <\/p>\n

          check GPU1 + GPU2 <\/p>\n

          EXT PWR Prim & Sec: ON <\/p>\n

          check Passenger Bus, Fuel Truck <\/p>\n

          Press Load Fuel Button (Menu). <\/p>\n

PREFLIGHT PROCEDURE:<\/strong> <\/p>\n

          cargo temperature selector: LOW <\/p>\n

          LP all ON, <\/p>\n

          Window Heat: ON, L + R ENG: ON, <\/p>\n

          No Smoking, Seatbelt: ON <\/p>\n

          ENG EEC Mode: NORM, L\/R Start\/Ignition: NORM, AUTOSTART: ON <\/p>\n

          WING, ENG Anti-Ice: AUTO, NAV: ON, (at night Logo: ON) <\/p>\n

          RP all ON\/AUTO <\/p>\n

          Recall: Check <\/p>\n

          Auto brake- RTO <\/p>\n

          FMC Selector- AUTO <\/p>\n

          Rudder Trim- 0 <\/p>\n

          turn on the right radio and select the right radio (press: OFF, WHF R, MIC Call L) <\/p>\n

          transponder: XPNDR – L, ALT Source: Norm, Standby <\/p>\n

          FMS – FMS1, Pos Init, Add Airport, select GPS Pos and click on Set Inertial Pos <\/p>\n

          FMS – Route- set origin and destination. \/ Next \/ Build Route (Waypoints or navaids- Right, airways left) <\/p>\n

          FMS – Press LEGS(EFIS: switch MAP & set range) FMS – pres STEP and check route <\/p>\n

          FMS – back to Route press Activate + press EXEC <\/p>\n

          FMS – save Route: press RTE, write Route Name, click SAVE (Load Route: enter saved name and click CO Route) <\/p>\n

          FMS – when Route is OK set FLT NO <\/p>\n

          Listen to ATIS: turn on left radio panel (press OFF + WHF L), set frequency and set as active, press MIC Call L <\/p>\n

          FMS – Press DEP\/ARR, press DEP, select RW + SID, Press EXEC <\/p>\n

          EFIS:  change to BARO + press RST(reset Minimums) <\/p>\n

          press FPV (ON) (flight path vector) <\/p>\n

          Set QNH <\/p>\n

          VOR or ADF switch: ON <\/p>\n

          map range: 10 <\/p>\n

          TFS (traffic switch) = ON (TCAS OFF) <\/p>\n

          F\/D – on, A\/T- Arm, <\/p>\n

          Heading- TRK <\/p>\n

          altitude selector from AUTO to 1000 <\/p>\n

          Recall: Check(NO VSPD, TCAS OFF) <\/p>\n

          check speed brakes – forward, Thrust idle, Flaps up, fuel control switches Cutoff <\/p>\n

          SPD Weather radar panel press WXT <\/p>\n

          center Radio Panel on <\/p>\n

          OBS Audio: NORM <\/p>\n

          LP switch APU: Start <\/p>\n

          if APU Running: EXT PWR Prim & Sec: OFF <\/p>\n

          uncheck GPUs, Pass Bus, Fuel Truck, <\/p>\n

PREFLIGHT checklist: completed<\/strong> <\/p>\n

BEFORE START PROCEDURE:<\/strong> <\/p>\n

Delivery Clearance<\/em> <\/p>\n

          FMS Performance Information Entry: press INIT REf, <\/p>\n

          FMS set Reserve and press Request, set CRZ ALT, Set Cost index <\/p>\n

          FMS Press Thrust Lim, set Temperature <\/p>\n

          FMS Press Takeoff, press Request, set Flaps (5), click V speeds to make them big, <\/p>\n

          EFIS set V2, ARM LNAV + VNAV, set RW heading, initial climb Altitude <\/p>\n

          close Doors, uncheck: Stairs, Doors, Chocks <\/p>\n

PUSH Clearance<\/em> <\/p>\n

          Pushback <\/p>\n

          Pressurize hydraulic: C1-ELEC-C2 : ON, L + R ELEC \/ C1-AIR-C2 : AUTO <\/p>\n

          Pressurize Fuel Pumps: ON <\/p>\n

          Beacon: ON <\/p>\n

          Recall: Check (DOORS AUTO, PAS SIGNS ON, APU RUNN, AUTOBRAKE RTO, PARK BREAK SET) <\/p>\n

          SET Trim for Takeoff <\/p>\n

BEFORE START checklist: completed<\/strong> <\/p>\n

START Clearance<\/em> <\/p>\n

          START ENGINE: Start\/Ignition: START,  Fuel control switch: ON <\/p>\n

AFTER START PROCEDURE:<\/strong> <\/p>\n

          LP APU: OFF <\/p>\n

          Engine Anti-Ice: As required <\/p>\n

          Recall: Check <\/p>\n

AFTER START checklist: completed<\/strong> <\/p>\n

BEFORE TAKEOFF PROCEDURE:<\/strong> <\/p>\n

TAXI CLEARANCE<\/em> <\/p>\n

          Taxi and Turnoff Lights: ON <\/p>\n

          Flaps: for Takeoff <\/p>\n

          Release brakes and taxi (Turn: 10, Straight: 25) <\/p>\n

BEFORE TAKEOFF checklist: completed<\/strong> <\/p>\n

TAKEOFF PROCEDURE:<\/strong> <\/p>\n

TAKEOFF CLEARANCE<\/em> <\/p>\n

          Landing lights: ON, Taxi lights: OFF, Strobe: ON, <\/p>\n

          SPDP Transponder: TA\/RA <\/p>\n

          WFR: as Required <\/p>\n

          Start Flight Clock Timer <\/p>\n

          Thrust Levelers at 55%N1, press TOGA Button <\/p>\n

          80 Knots <\/p>\n

          V1 <\/p>\n

          VR: Rotate <\/p>\n

          Positive Rate: Gears UP <\/p>\n

          Engage A\/P (over 200ft AGL) <\/p>\n

          Verify LNAV at 400ft <\/p>\n

          Verify VNAC at 1000ft <\/p>\n

          Retract Flaps <\/p>\n

AFTER TAKEOFF checklis
\nt: completed<\/strong> <\/p>\n

CLIMB PROCEDURE:<\/strong> <\/p>\n

          Engine Anti-Ice: Auto <\/p>\n

          at Transition Alt, QNH: STD <\/p>\n

          FL100: Landing, RW Turnoff Lights: OFF <\/p>\n

          FL200: Seat Belts: Auto <\/p>\n

CRUISE PROCEDURE:<\/strong> <\/p>\n

          When FUEL LOW CENTER msg. then CTR FUEL PUMP: OFF <\/p>\n

DESCENT PROCEDURE:<\/strong> <\/p>\n

          near T\/D: FMS DEP\/ARR, press DEP, select RW + STAR, Press EXEC <\/p>\n

          Minimums: set <\/p>\n

          verify VREF Speed <\/p>\n

          Auto brake: as required <\/p>\n

DESCENT CLEARANCE<\/em> <\/p>\n

          Seat Belts: ON <\/p>\n

APPROACH PROCEDURE:<\/strong> <\/p>\n

          FL100: Landing, RW Turnoff Lights: ON <\/p>\n

          Engine Anti-Ice: As required <\/p>\n

          Transition Alt: set QNH <\/p>\n

APPROACH checklist: completed<\/strong> <\/p>\n

LANDING PROCEDURE:<\/strong> <\/p>\n

          Flaps <\/p>\n

          LOC an G\/S Pointers <\/p>\n

          APP Mode: Arm <\/p>\n

          Localizer Capture: Checked <\/p>\n

          at G\/S alive: Gear Down <\/p>\n

          Speed Brake: ARM <\/p>\n

LANDING CLEARANCE(live on ILS)<\/em> <\/p>\n

          set missed approach Alt. <\/p>\n

          At final approach fix\/OM, verify crossing altitude. <\/p>\n

LANDING checklist: completed<\/strong> <\/p>\n

Go-AROUND PROCEDURE:<\/strong> <\/p>\n

          push TO\/GA <\/p>\n

          Flaps: 20 <\/p>\n

          Positive Rate: Gears UP <\/p>\n

          400ft LNAV or HDG SEL <\/p>\n

          after retracted FLAPS VNAV or FLCH <\/p>\n

AFTER TAKEOFF checklist: completed<\/strong> <\/p>\n

AFTER LANDING PROCEDURE:<\/strong> <\/p>\n

TAXI CLEARANCE<\/em> <\/p>\n

          Speed brake: Down <\/p>\n

          Start APU <\/p>\n

          Taxi Light: ON, Landing, Strobe Light: OFF <\/p>\n

          WXR: OFF <\/p>\n

          Auto brake: OFF <\/p>\n

          Flaps: UP <\/p>\n

          Transponder STBY <\/p>\n

          at Parking Position: Taxi, RW Turnoff light: OFF <\/p>\n

SHUTDOWN PROCEDURE:<\/strong> <\/p>\n

          Parking brake: set <\/p>\n

          Eng Anti-Ice: AUTO <\/p>\n

          GPU 1,2 <\/p>\n

          EXT PWR Prim & Sec ON <\/p>\n

          Fuel Control Switch: CUTOFF <\/p>\n

          Seatbelts: OFF <\/p>\n

          C1,C2 Primary pump switch: OFF <\/p>\n

          Demand pump switch: OFF <\/p>\n

          Fuel pump switch: OFF <\/p>\n

          Beacon: OFF <\/p>\n

          Chocks <\/p>\n

          Parking Brake: Release <\/p>\n

          APU: OFF <\/p>\n

SHUTDOWN checklist: completed<\/strong> <\/p>\n

SECURE PROCEDURE:<\/strong> <\/p>\n

          Adiru: OFF <\/p>\n

          Emergency Lights switch: OFF <\/p>\n

          PACK switch: OFF <\/p>\n

SECURE checklist: completed<\/strong><\/p>\n","protected":false},"excerpt":{"rendered":"

Checklist B777           uncheck Custom Failures, Real Limits, Hide Yokes, Real Time           check Chocks, Doors MAN, Stairs           open doors (Shift + F1\/F2)           Battery: ON           check GPU1 + GPU2           EXT PWR Prim & Sec: ON           check Passenger Bus, Fuel Truck           Press Load Fuel Button (Menu). PREFLIGHT PROCEDURE:           cargo […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[35],"tags":[122,150],"class_list":["post-4335","post","type-post","status-publish","format-standard","hentry","category-fly","tag-122","tag-fly-2"],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.yuleshow.com\/index.php?rest_route=\/wp\/v2\/posts\/4335","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.yuleshow.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.yuleshow.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.yuleshow.com\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.yuleshow.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=4335"}],"version-history":[{"count":0,"href":"https:\/\/www.yuleshow.com\/index.php?rest_route=\/wp\/v2\/posts\/4335\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.yuleshow.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=4335"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.yuleshow.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=4335"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.yuleshow.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=4335"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}